• Carbonated Drink Production Line
  • Carbonated Drink Production Line
  • Carbonated Drink Production Line

    Equipment type:Full automatic
    Application for bottle:Round plastic bottle
    Volume 200 – 2000ml
    Diameter:Φ50~120mm
    Bottle height:160~320mm
    Diameter of bottle mouth:Φ25~38mm
    Capacity Per hour: 3000~36000BPH

    Carbonated Drink Production Line Application

    LUYE PGF Series Carbonated filler is a kind of professional gassy beverages filling machine. It is multifunctional which can be used for washing, filling, and capping. It is a kind of advanced filling machine integrator that is innovated following the process requirements of filling gassy beverage based on the importing and assimilating the foreign advanced technology. It is applied mostly in washing, filling, and capping plastic caps for soda, cola, champagne, and mineral water. It is the perfect selection for a large or medium-size beverage factory due to its reasonable configuration, security of operation, dependability of running, and its so convenient maintenance.

    Carbonated Drink Production Line

    Carbonated Drink Filling Machine Details display

    Washing part

    The washing part is mainly composed of the supporting part, separating water seal and gutter components, reversal guiding rail, bottle clamp, lifting part, and transmission part.

    Filling part

    The filling part mainly consists of supporting parts, protuberant wheel, main liquid pipe component, cylinder part, filling machine pipe, elevator-cylinder, filling valve, controlling ring parts, four directions distributor and down distributor, etc. It is mainly used to filling the materials into the bottle. When a bottle is lifted to a valve by an elevator cylinder, the inspection device will find the bottle. The air valve will open after receiving the bottle signal, CO2 pipes begin to connect until the air pressure is the same both in the bottle and the cylinder, then starts filling, the materials filled in the bottle exhaust the CO2 which is back to the cylinder through pipes. When the lifting liquid level seals the pipe and the pressure in the bottle is larger than that in the cylinder, the filling stops. After filling, the off valve will shut the filling machine. The CO2 stored in the bottleneck then will be exhausted slowly through the exhausting protuberant wheel.

    Capping part

    The capping part composes of cap separating mechanism, capping machine, and cap arranging mechanism.
    The bottle is conveyed into the capping machine with starwheel and then is clamped with the bottle clamping block; the cap is arranged by the cap arranging mechanism and then is delivered to the cap separating mechanism from the lower cap tank; cap separating mechanism can separate the caps, and capping head may ascend and remove the cap and press it onto the bottle mouth with cam; under the drive of gear, capping head tighten the cap on the bottle mouth along the shaft, and keep constant capping moment; the well-capped bottle is delivered out with starwheel. The capping machine is connected with cap separating mechanism, lower cap tank, cap arranging mechanism with harmonious combination through several movements for delivering bottle, delivering cap, holding cap, and capping.


    Leave a Message

    If you have any questions, please leave us a message and we will reply to you as soon as possible